Cisco Keynote: Powering the modern workplace with Connected Intelligence

As work becomes more distributed and technology ecosystems grow more complex, organizations often manage collaboration, AV, IT, and AI in silos—creating friction, inefficiency, and limited insight into how workplaces truly perform. Watch as Espen Loberg explores Cisco’s vision of Connected Intelligence, showing how converged AV‑over‑IP networks, AI‑enabled collaboration, and partnerships with leaders like Microsoft, NVIDIA, and Zoom can deliver more seamless, intelligent, and measurable workplace experiences.

Crimping BNCs onto RG59

Learn how to crimp BNC connectors onto RG59 coaxial cable for reliable AV video signal connections. Review proper cable preparation and termination techniques.

AV and IT Collaboration Series | IP Address Planning

Learn IP address planning for AV systems, including addressing concepts and AV/IT considerations for networked audiovisual deployments.

The Audiovisual LAN Series| Estimating Video Bandwidth

Learn how to estimate video bandwidth for AV networks using resolution, frame rate, color, compression, and other signal characteristics.

The AVoIP Series | Network AV Systems Security

Learn fundamental security concepts for networked AV systems, including access control, device management, configuration, and AV/IT collaboration.

The AVoIP Series | VLANs and Subnets

Learn VLAN and subnet fundamentals, how they segment network traffic, and why they matter when deploying and managing AVoIP systems.

AV Math | Conduit Capacity and Jam Ratio

Learn how to calculate conduit capacity and jam ratio for AV installations. Apply these calculations to cable planning, installation, and infrastructure design.

Ohm's Law and Circuit Theory (Week 2 Video 2)

Learn Ohm's Law and basic circuit theory, including voltage, current, resistance, and power. Apply these principles to audiovisual system calculations.

Calculating Heat Load | CTS Prep

Learn how to calculate heat load in AV spaces by considering equipment power, room conditions, and other heat sources. Apply these concepts to AV system planning.

Scaled Drawings

Learn how scaled drawings represent AV spaces and equipment layouts. Understand scale, dimensions, and how drawings support accurate AV system design.